Call Us +61-413-468-955

Go Back

Cast Iron Sluice Valves

Cast Iron Sluice Valves

Cast Iron Sluice Valves

High quality C.I. sluice valves designed as per IS specification and norms. checkout models and sizes.

Application

  • Widely accepted by municipal corporations, water supply authorities, National Thermal Power Corporation and other government and industrial users.
  • Clear water having turbidity upto 5000 ppm and temp up 1oe 45oC.
  • Other fluids with maximum pressure/temp conditions not beyond the scope of IS-780/2906.
  • These valves are designed as per latest editions of IS specifications.

Accessories Available

  • Bypass Arrangement
  • Repacking Arrangement
  • Spur/Bevel/Worm Gear Arrangement
  • Locking Arrangement
  • Extension Shafting and Headstock
  • Electrical Actuator
  • Drain Plug
  • Chain/Chain Wheel

Bill of Material

Item No.Item Qty.Name of ComponentMaterialSpecificationComponent Drg. No.
1.1BodyG. Cast IronIS : 210FG 200VV/SV/BD/
2.2Body RingLaded Tin Br.IS : 318LTB2VV/SV/BR/
3.2Wedge RingLeaded Tin Br.IS : 210FG200VV/SV/WR/
4.1WedgeG. Cast IronIS : 1570PARTVVV/SV/W/
5.1StemStainless SteelIS : 318LTB2VV/SV/S/
6.1Wedge NutLeaded Tin BronzeIS : 210FG200VV/SV/WN/
7.1Bonnet G. Cast IronIS : 210FG200VV/SV/BT/
8.1GasketRubber IS : 638 TYPE BVV/SV/G1/
9.As Rqd.Bolt With NutCarbon Steel IS : 1367CL-4STD
10.Two SetStud With NutCarbon SteelIS : 1367CL-4STD
11.1GasketRubberIS : 638 TYPE BVV/SV/G2/
12.1Stuffing BoxG. Cast IronIS : 210FG200VV/SV/SB/
13.As Rqd.PackingAsbestosIS : 4687STD
14.1GlandG. Cast IronIS : 210FG200VV/SV/G/
15.1Hand WheelG. Cast IronIS : 210FG200VV/SV/HW/
16.One SetBolt With WasherCarbon SteelIS : 1367CL-4STD
17.As Rqd.Bolt With NutCarbon SteelIS : 1367CL-4STD

Salient Feature

  • Bronze / Stainless Steel Trim
  • Taper Seat
  • Compact Design
  • Renewable Parts
  • Body Seat Ring Sleeve Type
  • Perfect Interchangeability of components
  • Long Service Life and Leak tightness even after thousands of open/close cycles
  • Spares Available

Dimension Table

SizeΦB
±1
L
±2
ΦD
±2
T
+2
-0
ΦM
±0
NΦP
(PCD)
±1
X
(Size x Length)
Y
(NO)
ΦC
±1
S
(Size x Length)
P
(NO)
J
SIZE
H
±15
R
±2
W
±2
Z
±1
E
SIZE
F
(NO)
5050215165161941251/2" x2½"6261/2"  x6"23/8"345 14017614
6565230185161941451/2" x2½"6261/2"  x6"23/8"355 14019614
8080230200211941601/2" x2½"6261/2" x2½"23/8" 40514021514
100100255220221981801/2" x2½"8301/2" x6½"21/2" 43518023314
12512526625022.51982101/2" x2½"8301/2" x6½"21/2" 46018026214
150150280285232382405/8"x3"10321/2" x6½"21/2"540 18031217
20020031834024.52382955/8"  x3"10381/2" x5"21/2" 610225370171/2" x2½"4
2502503553952623123505/8"  x3"14441/2" x5"21/2" 765320434171/2" x2½"4
30030038044527.523124005/8"  x3"14441/2"  x5"21/2" 840320490171/2" x2½"4

Test Pressure Table

PN RatingValve Shell TestValve Seat Test
Pressure
(KG/CM)
Duration
(Minute)
Pressure
(KG/CM)
Duration
(Minute)
PN 1.0 15 5 10 2
PN 1.6 24 5 16 2

Notes

  • All Dimensions are in MM Except hardware.
  • Tolerance in height ±15MM.
  • Flanges details are as per IS : 1538 Flanges drilling as per other std can be provided.
  • Valves are designed as per IS : 780 Hydrostatic Pressure Table as per IS : 780.

Leave a Reply

Your email address will not be published. Required fields are marked *

Search Articles

Recent Comments

Archives

Recent Posts